USB CrossConnect Windows Installation Guide

This document contains instructions for installing your USB CrossConnect hardware in Windows.

In order to use your USB CrossConnect you will also need to install the CrossWorks IDE which is covered separately.

System Requirements

Support for USB CrossConnect is provided for the following versions of Windows:

• Windows 8
• Windows Server 2012
• Windows Server 2008 R2
• Windows 7
• Windows Server 2008
• Windows Vista
• Windows Server 2003
• Windows XP
• Windows 2000

Installing USB CrossConnect Software from a CD/DVD ROM

1. Put the USB CrossConnect installation disk into the drive.
2. Attach CrossConnect's USB connector to your PC, upon successful connection the power LED will illuminate red and Windows will prompt you that it has found new hardware.
3. From the Found New Hardware Wizard select Install the software automatically and then click Next.
   
   
   
   
4. Windows will now install the USB CrossConnect software. When the installation is complete you will be prompted. Click Finish to close the wizard.
   
   
   

Installing a Downloaded Version of the USB CrossConnect Software

1. Download and unzip the USB CrossConnect Software.
2. Attach CrossConnect's USB connector to your PC, upon successful connection the power LED will illuminate red and Windows will prompt you that it has found new hardware.
3. From the Found New Hardware Wizard select Install from a list or specific location and then click Next.
   
   
   
   
4. Select Search for the best driver in these locations, check the Include this location in the search option, select the directory that you unzipped the USB CrossConnect software into using Browse and then click Next.
   
   
   
   
5. Windows will now install the USB CrossConnect software. When the installation is complete you will be prompted. Click Finish to close the wizard.